4
1. Raising the Steering Column
a. Pull up the quick release clamp lever at the base of the steering
column to release the clamp, then push the lever forward to
disengage.
b. Push the lever downward and to the left to disengage the pin,
then push the steering column upward until it is in the full upright
position.
c. When the steering column is upright, release the clamp lever so
the pin goes back into the hole.
d. Lift the clamp lever up and rotate it clockwise to tighten the
pressure on the lever.
e. At the correct pressure, pull the lever down so the end of the lever
is pointing towards the ground in order to lock the steering column
in the upright position.
f. NOTE: Rotate the lever counterclockwise to loosen the pressure
on the lever.
2. Folding the Steering Column
a. Release the clamp lever at the base of the steering column, then
push the lever forward to disengage.
i. NOTE: Rotate the lever counterclockwise to
loosen the pressure on the lever.
b. Push the lever downward and to the left to disengage the pin,
then push the steering column downward to its folded position.
INSTALLATION
Steering Column Assembly
When you receive your knee walker, the steering column will
be in the folded position.
IMPORTANT NOTE
The lower bolt of the front axle can be removed so that the wheels
can be placed sideways to save space while traveling. If loosened,
please retighten the bolt into the front axle before riding.
