4
IMPORTANT
Start threading each pedal by
HAND
,
THEN FULLY
TIGHTEN
each pedal with a wrench. Using a wrench
pedals can damage the crank arms.
ASSEMBLY
Step 3 Handlebars
1.
Pulse Handlebar Wire (42) to the Pulse Coiled Wire (41) on the Seat Frame (5). Store excess
Spring Washers (104), and two M8 x 15L Dome Head Allen Bolts (84) as shown in Fig. C1.
2.
Insert the Seat Adjustment Handle (11) into the bracket welded to the Seat Frame (5). As
M8 x 8L Set Screws (97) and then tighten the Set Screws (97) against the flat side.
Step 4 Assemble Pedals
1.
an "L".
CAREFULLY
screw each pedal in by
HAND
.
2.
Wrench (122)
.
D1
23R
12R
12L
23L
C1
C2
C3
41R
42R
41L
42L
42L
41L
97
5
11
42R
41R
84
7R
84
7L
104
104
IMPORTANT NOTE!
Be Careful not to pinch any of the wires while assembling the handlebars.
