16
STEP 9 INSTALL LEG EXTENSION CABLE
LEG EXTENSION CABLE (84)
E1
E4
E5
E3
E2
E6
E7
Threaded End
Steel Ball End
E2
E1
E3
STEP1
101
1
101
24
E7
101
147
146
1
E5
100
147
146
1
E6
E3
E2
1
101
118
101
141
141
164
140
147
164
147
E2,E3,E4
E4
101
118
E1
22
1. Hook the steel ball end of the Leg Extension Cable (84) into the groove in the Leg Curl
Cam (22) as shown in Fig. E1. and then route the cable in between two pulleys (E2 and
E3) mounted using one 3/8" X 75L Flat Pin Bolt (141), four 3/8" Washers (164) and one
M6 X 12L Male Screw (147) each, as shown in Fig STEP 1. Continue routing the cable
down and around Pulley E4 mounted in a slot in the front of the Main Frame (1) using
one 3/8" X 75L Flat Pin Bolt (141) and one M6 X 12L Male Screw (147).
2. Route the cable down and around pulley E5 mounted under
Seat Adj. Frame (12), using one 3/8" X 30.5L Flat Pin Bolt
(146) and M6 X 12L Male Screw (147). Then route cable
around E6 mounted under rear Main Frame (1), using one 3/8"
X 30.5L Flat Pin Bolt (146) and M6 X 12L Male Screw
(147), and up to screw the threaded end into the Single Pulley
Block (24).
