3
ASSEMBLE LEG PRESS STATION
19
54
1
201
202
204
205
206
207
208
203
211
215
213
221
222
221
32
213
219
212
211
211
211
211
214
231
231
232
231
231
231
239
90
90
77
236
238
238
238
238
239
238
238
240
240
240
240
240
240
237
239
237
234
220
218
Remove the 50 MM END PLUG(32) from BASE FRAME(1).
Remove PEC DEC SEAT PAD(54) from PEC DEC SEAT(19).
Attach CONNECT TUBE(201) to BASE FRAME(1) using three 3/8" X 1/2" HEX HEAD BOLT(236)
and three 3/8" WASHER(239).
Attach MAIN FRAME(202) to CONNECT TUBE(201) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240). Attach MAIN FRAME to PEC DEC SEAT(19) using
3/8" x 3" HEX HEAD BOLT(232), two 3/8" WASHER(239) and 3/8" NYLON NUT(241).
Attach FRONT STABILIZER(203) to MAIN FRAME(202) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240).
Insert two 3/4" BUSHING(216) to MAIN FRAME(202), then attach LEG PRESS SUPPORT(204)
to MAIN FRAME(202) using AXLE(208), two 1/2" WASHER(237) and two 1/2"
NYLON NUT(240).
Attach FOOT REST(206) to SLIDING TUBE(205) using two 1/2" x 3" HEX HEAD
BOLT, four 1/2" WASHER(238) and two 1/2" NYLON NUT(240).
Then insert SLIDING TUBE(205) into LEG PRESS SUPPORT(204)
and lock with KNOB(219).
Reinstall PEC DEC SEAT PAD(54) as shown.
