5
ASSEMBLY INSTRUCTIONS
Please take the assembly hardware out of the hardware package box. Lay all the hardware
out and take note for its locations. Follow the assembly instruction step by step to complete
the assembly. Do not tighten any screws until instructed.
Step 1: Upright Posts Assembly
1. Straighten out the main wire harness and insert it
though the top of left upright post.
2. Slide the upright post onto its receptor and insert three
M8 x55mm screws on the side and two M8 x 15mm
screws on the front. Be careful not to pinch the main
wire harness when inserting these screws.
3. Repeat procedure 2 for the Right upright post.
4. Do not tighten bolts until end of assembly.
Step 2: Console Assembly
1. Hold the console next to the Left upright post
and connect the main wire harness connec
-
tors together.
2. Insert the console U bracket into each side of
upright post. Be careful not to pinch the wire
harness while inserting the U bracket.
3. Insert three M8 x12mm screws each on inner
and outer Left upright post (total 6 screws on
each upright post).
4. Repeat procedure for Right upright post.
5. Do not tighten bolts until end of assembly.
Step 3: Handrail Assembly
1. Insert Left handrail into Left handrail recep
-
tor.
2. Insert two M6 x12mm screws.
3. Repeat the procedure 1 & 2 for the Right
handrail.
4. Do not tighten bolts until end of assembly.
