BodyCraft BC-F605, Assembly Instructions Manual

Page: 17 / 32

F605
17
Step 6: Assembly of the leg press Part 2
1. Place the Spacer Cap (209) on the Attachment Holder (201).
2. Slide the Hold Down Tube (202) through the
Spacer Cap (209) into the Attachment Holder
(201).
⚠ CAUTION
Make sure that the control knob (210) audibly
engages in one of the setting holes during the
next step.
3. Fasten the Hold Down Tube (202) to the
Attachment Holder (201) with the adjusting knob
(210).
4. Attach Attachment Holder (201) to the Main
Frame (1) using two 1/2” X 4-3/4” Hex Bolt (214),
four 1/2” Washers (216) and two 1/2” Nylon
Nuts (217).
5. Install 45 X 75mm End Plug (207) to the
Attachment Holder (201), and two 45 X 45mm
End Plugs (208) to the Hold Down Tube (202).
6. Tighten all bolts and screws.