BodyCraft BC-F605, Assembly Instructions Manual

Page: 16 / 32

F605
16
2.3.2 Leg Press (optional)
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 5: Assembly of the leg press Part 1
1. Insert two Foam Roller Holders (203) into the Hold Down Tube (202).
2. Slide one Plastic Washer (211) and one Foam Pad Cover (205) onto each end of the Foam Roller
Holder (203).
3. Mount the Aluminum Cap (212) onto each end of the Foam Roller Holder (203) by using four
5/16” X 1-1/4” Screws (215).