24
P063GUI001 - User guide eCelsius Performance Connect.1 - EN
At the end of the monitoring period with ePerf Mobile and once
your capsules are deactivated from the profile, several options
are available to properly close your session. Please go to the
device settings:
END OF MONITORING - APPLICATION
Separate the profile and the device:
This action can be performed:
- at the end of the monitoring period to archive the data and to allow the device to be used
again with another profile.
- in use if you no longer need to track the device and to allow to be tracked by another mobile
object.
Example of use:
The user of the Android device no longer intends to track the ePerf Connect device but
this one continues to function (it is tracked by another Android device).
Dissociate the mobile object and the device (Bluetooth):
This action will remove the automatic BLE connexion with the device. The device will no longer appear
in the list of available devices. You will have to go through the pairing process again to be able to reset
communication with the device.
Example of use:
The device disappears completely from the user’s environment. This one will no longer
follow this device in the future (rental return).
Reset the device:
Resetting the device will couple profile/device separation and deletion of data and markers from the Android
device memory.
This action is only possible if the device is connected to the application and no capsule is still active.
Example of use:
The profile/device measurement session has ended. ePerf Connect data are deleted to
return the system to shelf mode.
ePERF CONNECT DEVICE TURN OFF
It is possible to turn off the ePerf Connect device using the ePerf Mobile application. To do so, please go to
the device settings (see paragraph above) and press the corresponding button.
The device has to be connected to the application. Once the command is sent, the device displays a shutdown
message and will shut down after a few seconds.
