8
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 1B. Some components may be
pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench
tighten to fully go on.
1A.
Attach Uprights
(B)
to Base Frame
(A)
using:
4 - (#1) M10x70mm Hex Head Bolt
8 - (#4) M10 Flat Washer
4 - (#5) M10 Nylon Lock Nut
2 - (D) STEEL PLATE
1B.
Attach Uprights
(B)
to Logo Plate
(C)
using:
4 - (#1) M10x70mm Flat Head Cap Screw
4 - (#4) M10 Flat Washer
4 - (#5) M10 Nylon Lock Nut
