5
A s s e m b l y I n s t r u c t i o n s
Assembly of the GMR5 takes professional installers about
1/2
hour to complete. If this is the
first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly
steps sequentially, the process will take time, but is fairly easy.
Assembly Tips
Read all “Notes” on each page before beginning each
step.
While you may be able to assemble the GMR5 using
the illustrations only, important safety notes and other
tips are included in the text.
Some pieces may have extra holes that you will not
use. Use only those holes indicated in the instructions
and illustrations.
NOTE: To find out the length of a particular bolt,
measure its shank (the long, narrow part
beneath the head). Refer to the following
diagram:
Do not fully tighten bolts until instructed to do so.
Note:
After assembly, you should check all functions
to ensure correct operation. If you experience
problems, first recheck the assembly instructions
to locate any possible errors made during assembly.
If you are unable to correct the problem, call the
dealer from whom you purchased the machine or
call 1-800-556-3113 for the dealer nearest you.
IMPORTANT!
Before you begin you should look at the quick refer-
ence guide that shows all hardware parts (in actual
size) along with the corresponding key numbers on
the assembly instructions.
Summary of Contents for GMR5
Page 7: ...7 S T E P 1 Above shows Step 1 assembled and completed ...
Page 18: ...18 ...
