16
S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of
and after STEP 2A. Some components may be pre-assembled. Nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
2A.
Attach Back Frame
(H)
to Pivot Arms
(E)
using:
4 - (#5) M8x20mm Hex Head Bolt
8 - (#14) M8 Washer
4 - (#20) M8 Nylon Lock Nut
2D.
Insert Adjustment Frame
(J)
into Back Frame
(H)
