12
S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of
and after STEP 2F. Some components may be pre-assembled. Nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
2A.
Insert Telescoping Tube
(C)
into Angle Adjustment Tube
(D)
.
2B.
Screw M8x20mm Hex Head Bolt
(5)
into Angle Adjustment Tube
(D)
.
2C.
Screw Lock Knob
(17)
into Angle Adjustment Tube
(D)
.
2D.
Attach Trampoline Frame
(B)
to Base Frame
(A)
using:
2 - (#4) M10x25mm Hex Head Bolt
4 - (#7) M10 Washer
2 - (#8) M10 Nylon Lock Nut
2E.
Attach Telescoping Tube
(C)
to Trampoline Frame
(B)
using:
1 - (#1) M10x100mm Hex Head Bolt
2 - (#7) M10 Washer
1 - (#8) M10 Nylon Lock Nut
2 - (#15) Bushing
2F.
Attach Angle Adjustment Tube
(D)
to Base Frame
(A)
using:
1 - (#1) M10x100mm Hex Head Bolt
2 - (#7) M10 Washer
1 - (#8) M10 Nylon Lock Nut
2 - (#15) Bushing