Body Solid Fusion 400, Owner'S Manual

Page: 12 / 72

12
3
S T E P
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step.
Do Not
wrench tighten until end of step 13.
A. Attach Leg Hold Down Frame (P) to Main Front Frame (F) by using:
Two 62 (M10x75 partial thread hex head bolt)
Four 79 (M10 washer)
Two 84 (M10 nylon lock nut)
NOTE 1:
The position of Leg Hold Down Frame (P) may be adjusted in a higher or lowerposition depending
on the user's needs. Cover unused holes with Round End Cap (29) as shown in the diagram.
B. Slide Foam Roller (22), Nylon Washer (40) and Roller End Cap (23) to
the ends of Leg Hold Down Frame (P) as shown in the diagram.
C. Connect Left Functional Training Arm (J) and Right Functional Training Arm (H) to
Main Top Frame (E) as shown by using:
Two 69 (M10x20 allen head bolt)
Two 79 (M10 washer)
D. Insert Convex End Caps (36) to Left Functional Training Arm (J) and Right Functional Training Arm (H).