10
5
S T E P
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 5.
S T E P
5
Be careful to assemble all components
in the sequence they are presented.
A. Connect the large Stamped Eye End of Cable (D13) to Rotating Frame (B) by using:
One A6 (M8x16)
One D14 (steel bushing)
B. Begin routing Cable (D13) through Pulleys (D15) around Pulley (D11-A) through Mainframe (A).
C. Continue routing Cable (D13) around Pulleys (D11-B) and (D11-C) and attach the small Stamped Eye
End to the gym's connection as shown in the diagram using:
One A7 (M10x20)
One B1 (M10 nylon lock nut)
14
mm
Inch
0 10
20 30
40 50 60 70 80 90 100 110 120 130 140 150
0 1"
2"
3"
4" 5" 6"