-
5
-
STEP 2
• Loosen and remove the front support knob. (Be careful not to lose the washer
when you remove the knob.)
• Remove the two small bolts from both sides of the front support, being careful
to keep the two washers in place on each bolt. Set aside for now.
• Slide the front support into the front of the swing assembly, keeping the hole
for the knob facing to the front. Replace the knob and washer.
• Now using the two small bolts and washers previously set aside, reinstall on
both sides of the assembled front support and swing assembly. Hand-tighten
for now.
Wrench Tighten All Nuts and Bolts
Use the provided wrench to tighten each of the nuts and bolts in rotation.
Once you have tightened each nut and bolt, start back at the first and tighten
again.
Press the provided covers over the nuts and bolt heads.
