7
BASIC PROGRAM DIRECTION
The speed can be adjusted optionally (not available for automatic program).
1.Confirm the power supply (220V), and then press the POWER button.
2.Set the time to 10 minutes on the time display by pressing the UP and DOWN button optionally.
(Time limitation:1-20 minutes)
3.Press the START button to start the massage vibration button at the basic speed of 1 Cycle/sec.
(Speed range:0-50 Cycles/sec)
4.Press the UP and DOWN button to set the speed wanted when running. (Time limitation:1-20
minutes)
5.Press the STOP button to stop the massage vibration.
PRESS THE HI/MID/LOW BUTTON TO SET THE SPEED CONVENIENTLY.
HI
40 Cycles/sec for skilled mode.
MID
25Cycles/sec for single exercising mode.
LOW
15 Cycles/sec for warming-up mode.
AUTOMATIC PROGRAM DIRECTION
1.Confirm the power supply (220V), and then press the POWER button.
2.Press P1/P2/P3 to set the starting program.
3.Press START button. The massage vibration pedal will run gradually at the set speed.(It can be set
when running).
4.Press the STOP button to decelerate and stop the vibration. The basic time is 10 minutes. The
vibration will stop with “beep”.
