PBC5380
Page 5
Assembly STEP 1
With the help of an assistant, align and attach the Rear
Cross Frame (Bottom)
(#19)
to the Left Bottom Frame
(#01)
. Attach them together by using two Reinforcement
Plates 1
(#16)
, four Hex Bolts
(#23)
secured by two
Washers
(#24)
for the outer holes as shown in diagram,
and four Nylon Nuts
(#26)
.
Repeat this process on the right side using Right Bottom
Frame
(#02)
.
Hardware Required
NOTE:
To avoid misalignment due to over-tightening,
please do not use a wrench at this time.
Hand-tightening for now will help ensure easy
assembly.
Wrench-tightening should be performed after all
parts are assembled to ensure all nuts, bolts, and
parts are tightly secured before use.
LEFT
RIGHT
#26
Nylon Nut (M10)
[8 Pieces]
#23
Hex Bolt (M10x95 mm)
[8 Pieces]
#24
Washer (M10)
[4 Pieces]
