PBC5380
Page 9
Assembly STEP 5
A.
Using the diagram for reference, on the left side,
align and insert two Band Pegs
(#03)
***
from the
inner main frame outwards through Left Bottom
Frame
(
#01)
. Attach them together by using two
Spring Clips
(#34)
from the outer sides of the Left
Bottom Frame
(#01/02)
.
Repeat this process on the right side.
B.
Using the drawing for reference, insert and rotate to
install the Left/Right Full-length Safety Rods
(#06/07)
***
so they are securely resting and fully
engaged through your desired hole settings in the
Front/Rear Upright Frames
(#17/20)
.
C.
Insert and rotate to install the Left/Right Weight Bar
Safety Catch
(#10/11)
***
so they are securely resting
and fully engaged through your desired hole settings
in the Front Upright Frames
(#17)
.
D.
Insert and rotate to attach the Left/Right Dip Bar
Attachment (
#08/09)
***
so they are securely resting
and fully engaged through your desired hole settings
in the Front/Rear Upright Frames
(#17/20)
.
***IMPORTANT NOTE: For your safety and to avoid
serious injury, ALWAYS ENSURE the
Band Pegs
(#03),
Left/Right Full-length Safety Rods
(#06/07),
Left/
Right Weight Bar Safety Catches
(#10/11),
and Left/
Right Dip Bar Attachments
(#08/09) ARE INSTALLED
AT THE SAME HEIGHT SETTINGS BEFORE USE.
At this point, secure
ALL
the Nylon Nuts
(#2
6
)
that
were hand tightened in previous steps with
appropriate
tools.
Hardware Required
B
D
C
A
#34
Spring Clip
[4 Pieces]
NOTE:
FLOOR ANCHORS
This piece of equipment includes four (built-in)
Floor Anchors
(#21)
that allow the user to mount
the equipment to the floo .
Floor mounting is optional but highly recommended
as it increases stability in pieces of equipment that
are used often or used with heavy weight. Mounting
hardware is NOT PROVIDED, but can easily be
obtained at your local hardware store.
Find a qualified store employee to help you
select the proper type of hardware for your type of
installation, whether it be into concrete, a wooden
subfloo , etc.
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read
this entire Owner’s Manual which includes safety instruc-
tions and warnings, as well as any safety/warning labels
affixed to the product before use
For your safety , please visually and functionally inspect
and test the unit after assembly is complete.
LEFT
RIGHT
