9
Handle refrigeration adjust range:1—5
，
adjusting when you need under treatment.(PS:when you do treatment,
you must set the refrigeration range)
Time setting range is 1-10S, this time after the release of the pedal
is not pressed emission time, the cure process can be adjusted.
First column is this cure times above the display,followed by zero
point reset key. The second shows the total number of therapeutic
cure mode To this end, in the background settings interface can be cleared
(at the back will detail how to be cleared).
After all the settings are finished, ready to start charging the
pre-combustion work, then the interface will become standby ,
after 1second becomes a successful pre-combustion
and then you
can start to treatment.
(This picture shows the ready status icon display.)
PS
：
Descripition of Different icons.
1.handle
：
the inactive state
，
the active state.
2.
normal temperature.
3.
normal water flow.
4.
the charged state,can work as usual.
the uncharged statethe.
5.
work status
6.
back to (Figure 4)
