BST800
Page 8
Hardware Required
2 pcs
Hardware Required
#55 Left Pedal Hinge Bolt 1 pc
#56 Right Pedal Hinge Bolt 1 pc
#94 Left Nylon Nut (1/2") 1 pc
#95 Right Nylon Nut (1/2") 1 pc
#96 Spring Washer (1/2") 2 pcs
#72 Nylon Nut (M8)
4 pcs
#81 Hex Bolt (M8x50 mm)
4 pcs
#24 Wheel
#100 Bolt (φ10x30xM8x12 mm)
2 pcs
#102 Wave Washer (1/2")
2 pcs
#115 Bolt Cap
2 pcs
Secure the
Left Pedal Hinge Bolt (#55)
tightly into the
Left
Crank (#58)
by turning
CLOCKWISE
.
Then, secure with a
Spring Washer (#96)
and a
Left Nylon Nut (#94)
Align and attach the
Left Pedal Tube (#05)
to the
Left Crank
(#58)
. Insert the
Left Pedal Hinge Bolt (#55)
through
a
Wave Washer (#102) , Left Pedal Tube (#05)
and
Left Crank (#58)
.
Attach
Left Pedal (#21)
to the
Left Pedal Tube (#05)
, secure
with two
Hex Bolts (#81)
and two
Nylon Nuts (#72)
.
Repeat the above process on the right side of the machine.
Attach the Wheel (#24) to the Left Pedal Tube (#05), secure
with one
Bolt (#100)
.
Repeat the above process on the right side of the machine.
by turning
COUNTER-CLOCKWISE
.
Attach
Bolt Cap (#115)
to the
Left Carnk (#58).
Assembly STEP 2
