•
In Cycle Mode, both channels are on and
off in regular cycles.
•
Frequency can be adjusted between 1 and
80Hz using the ‘FREQ’ key, and intensity
can be adjusted using the ‘CH1’ and ‘CH2’
keys.
•
The 'TIMER' button and the 'TIME' key
are operated as follows:-
•
Press the ‘TIMER’ button and the on time
will be displayed with the number of
seconds flashing. Adjust the on time
using the ‘TIME’ key.
•
Press the ‘TIMER’ button to confirm your
selection and the off time will now be
displayed, again with the number of
seconds flashing. Adjust the off time
using the TIME key. Confirm your
selection using the ‘TIMER’ button.
•
You can now use the ‘TIME’ key to set the
timer to automatically switch the unit off
after 5 to 40 minutes (in 5 minute
intervals), or to stay on until switched off
manually (‘C’ setting) in exactly the same
way as for the Constant Mode described
on page 10.
Cycle Mode
11
Profile EMS Instructions 18/5/06 10:19 Page 12
