Page 6
Make sure these two wires are accessible and exposed (as shown)
before proceeding to the next step. If they have fallen
inside the tube, use a bent wire to “fish” them out.
Spinning
End Caps
Height Adjustable
End Caps
A s s e m b l y S t e p 1
With the help of an assistant, attach the
Front Stabilizer (#12)
to the front of the
Main Frame (#01)
. Insert two
Carriage Bolts
(#30)
through the
Front Stabilizer (#12)
followed by the front
of the
Main Frame (#01)
. Secure them together using two
Arc
Washers (#43)
, two
Spring Washers (#45)
and two
Cap Nuts
(#40)
. Now attach the
Rear Stabilizer (#13)
to the rear of the
Main Frame (#01)
. Insert two
Carriage Bolts (#30)
through the
Rear Stabilizer (#13)
followed by the rear of the
Main Frame
(#01)
. Secure them together using two
Arc Washers (#43)
, two
Spring Washers (#45)
and two
Cap Nuts (#40)
.
Please Note that the
Front Stabilizer (#12)
has end caps that
spin for ease of relocating the unit and the
Rear Stabilizer (#13)
has height adjustable end caps for leveling of the unit.
Hardware Required
#30. Carriage Bolt (M8x65 mm
)
[4 Pieces]
Washer
#43. Arc Washer (M8
)
[4 Pieces]
#45. Spring Washer (M8
)
[4 Pieces]
Nut
#40. Cap Nut
(M8)
[4 Pieces]
Bolt
Assembly Instructions
BRM 2788/3588
