Assembly Instructions
A s s e m b l y S t e p 3
H a r d w a r e R e q u i r e d
A.) Cushion Frame Assembly
Page 8
BRB 5885
Remove the pre-assembled parts from the
Sliding Block (#40)
and set them aside nearby: four
Bolts (#61)
, four
Spring
Washers (#08)
and four
Washers (#23).
B.) Rear Handle Bar Assembly
61
08
23
21
08
23
42
40
42
With the help of an assistant attach the
Cushion Frame (#42)
onto the
Sliding Block (#40),
secure by using four
Bolts (#61)
,
four
Spring Washers (#08)
and four
Washers (#23).
Using the illustration below for reference, align the six holes of
the
Reinforcement Plate (#49 ), Rear Handle Bar (#44)
to the
holes on the
Cushion Frame (#42)
and secure using two
Carriage
Bolts (#50),
two
Washers (#23),
two
Spring Washers (#08)
and
two
Cap Nuts (#21).
Connect the
Hand Pulse Wire 3 (#25) to the Hand Pulse Wire
4 (#48)
as illustrated below (diagram C).
A
Bolt
Washer
#61. Bolt (M8x20 mm)
[4 pieces]
#50. Carriage Bolt (M8x47 mm)
[2 pieces]
#21. Cap Nut (M8)
[2 pieces]
Nut
#08. Spring Washer (M8)
[6 pieces]
#23. Washer (M8)
[6 pieces]
49
44
25
48
48
25
50
B
C
