BCR1000 / 890
Page
13
Assembly STEP 7
Hardware Required
No hardware required
THE ASSEMBLY PROCESS IS
NOW COMPLETE.
However, for your own safety, please make sure to
read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any
safety/warning labels affixed to the product before use.
For your safety, please visually and functionally
inspect and test the unit after assembly is complete.
Insert Right Upper Slide Rails
(#03R)
into the Right Lower
Slide Rails
(#04R)
. Insert Left Upper Slide Rails
(#03L)
into the Left Lower Slide Rails
(#04L)
.
Select a height setting that is comfortable to user by
adjusting the Clips
(#25)
.
FOR YOUR SAFETY AND TO AVOID SERIOUS INJURY,
ALWAYS
ensure both handlebars are set at the same
height.
NOTE:
Before starting your workout, please always check and
ensure the cable is positioned inside the pulley
as illustrated below
03L
03R
25
25
04L
04R
