INSTRUCT
ION
FOR
USE
10
HOW TO USE THE WATER KETTLE
FILLING THE WATER KETTLE
– Remove the appliance body from the base unit (7).
– Open the lid (1), fill with water and close the lid again.
Do not fill the kettle with less than 0.25l/7 oz and not
more than 1 l/34 oz (above the MAX mark), to prevent the
kettle from boiling dry or boiling water escaping from the
spout.
CONNECTION TO POWER SUPPLY
– After filling the kettle, position it on the base unit (7).
Ensure that the kettle body is seated correctly on the con-
tact unit on the base unit (7).
– Connect the mains plug to the power supply and move the
ON/OFF switch (5) into the ON (
I
) position.
Note:
Ensure that the ON/OFF switch is able to move freely.
SWITCHING OFF
– Your kettle has an automatic ON/OFF switch and will switch
itself off automatically as soon as the water boils.
– You can switch off the kettle at any time by moving the ON/
OFF switch (5) into the OFF (
0
) position.
Note:
The kettle cannot be switched off by hand if the
switch is obstructed for movement, or if the ON/OFF switch is
pressed into the ON (
I
) position.
POURING OUT WATER
– To remove the kettle from the base unit (7), hold it by its
handle. Ensure that the kettle body remains level while
lifting it from the base unit (7).
– Pour the water from the spout with the lid (1) closed.
Note:
Please take care when pouring out water as boiling
water can cause scalds.
SWITCHING THE KETTLE ON AGAIN
– If the kettle was switched off by hand, it can be switched
on again at any time.
– You may switch the kettle on again as soon as the built-
in thermal safety cut-off switch has had sufficient time to
cool.
MAINTENANCE AND CARE
SCALE FILTER
Scale, or calcium, is a natural substance that forms when hard
water is boiled. The filter serves to retain the calcium in the
water kettle.
Summary of Contents for BISTRO 11452
Page 3: ...1 2 5 6 7 9 4 8 3 ...
Page 31: ...32 MODE D EMPLOI ...
Page 39: ...40 BRUGSANVISNING ...
Page 71: ...72 BRUKSANVISNING ...