INSTRUCT
ION
FOR
USE
6
– Do not touch any hot surfaces.
– Only use the handle to pick up the kettle.
– The use of any accessory attachment, not
recommended by the appliance manufac-
turer, may result in fire, electric shock or
injury to persons.
– Never fill the kettle with water when it is
positioned on the base unit.
– Never fill the kettle above the «MAX» mark.
– Scalding may occur if the lid is removed
during the brewing cycles.
– If the kettle is overfilled, boiling water
may be ejected.
– Do never boil water without the lid on.
– Always ensure that you pour out boiling
water slowly and carefully, taking care not
to tilt the spout too rapidly.
– To prevent scalding, avoid coming into
contact with the steam escaping from the
opening in the lid when the water is being
boiled or just after the kettle has switched
off. Be careful when opening the lid, if the
kettle is still hot and you wish to refill it
with water.
– Boiling water can cause burns.
– Move the appliance with extreme care
when it contains hot water.
– Do not forcefully locate the switch in the
ON position, or make any authorised chang-
es to the switch in order to make it stay in
the ON position. This could lead to steam
escaping from around the lid, damaging
the automatic switch-off mechanism and
possibly causing bodily injury.
– Never immerse the item in water, remem-
ber this is an electrical appliance.
– Only clean the appliance using a damp cloth.
– To disconnect, turn any control to «off»
Summary of Contents for BISTRO 11452
Page 3: ...1 2 5 6 7 9 4 8 3 ...
Page 31: ...32 MODE D EMPLOI ...
Page 39: ...40 BRUGSANVISNING ...
Page 71: ...72 BRUKSANVISNING ...