25
8.1 Viewing the circuits
Select the number of the circuit you wish to view with the
key.
Select DISPLAY mode with the
and
keys and validate with the key
.
The display of the parameters is fixed and
the step numbers flash.
The
and
keys can be used to scroll
all the program steps.
Use the
key to exit from the menu at any time.
The program steps are displayed in the order of the times and then by type:
weekly order, holidays, special and then PC step.
Steps 01 to 99 are indicated with the total number of steps; if the step is
greater than 99 then only the step number from 001 to 500 is displayed.
8.2 Programming the circuits
Select the number of the circuit you wish to program, or modify the
programming with the
key.
The circuits can be programmed in the following modes:
- Weekly,
- Holidays,
- Special,
- Public holidays,
- Additional step,
- Astronomical,
- Periodic.
Only the first 4 modes are accessible from the master clock. All the modes are
accessible from the PC software.
Select PROG mode with the
and
keys and validate with the
key.
If the first step is blank, the time flashes.
Enter the time with the
and
keys
Cir.01:08:02:00 03s
MTWTFS- Weekly 01/12 ú
Cir.01:HH:MM:SS ---ú
MTWTFS- Weekly 01/01ok
Summary of Contents for Sigma Mod
Page 4: ...4 SIGMA M Installation and start up instructions...
Page 65: ...65...