24
IV - TIME SETTING MENU
4.1 Quartz Clock
Adjusting the time and date
The [SEL] button enables you to shift between the different menus and the
[+]
1
button enables you to scroll through the setting values.
Caution
: it is necessary to set up the clock in independent synchronisation mode in order to get
a proper operation (see page 33).
To set the clock to the correct time, proceed as follows :
1. a When the power is on, the 2 dots flash. Press [SEL] for 2 seconds : the
hour flashes.
b Press [+] until the required hour is shown (the display of hours takes
account of the 12 /24 hr mode, see paragraph 5 page 26).
2. a Validate the hour by pressing [SEL] : the minutes flash.
b Press [+] until the required minute is displayed. To synchronise your
clock to the nearest second, select the current 1 and as the
minute pips, validate by pressing [SEL] ;
The internal second counter is then reset to zero and starts up.
3. a Having validated the minutes : the year flashes.
b Press [+] until the current year is displayed.
4. a Validate the year by pressing [SEL] : the month flashes.
b Press [+] until the required month is displayed.
5. a Press [SEL] to validate the month : the day flashes.
b Press [+] until the chosen day is displayed (Scrolling of the days takes
account of the month and year selected (leap years)).
6. a To conclude time setting, press the [SEL] button.
Caution : At any time by holding down [SEL] then, pressing [+] quickly,
will return you to normal display mode. If no buttons are pressed for a
period of over 10 minutes, the clock automatically returns to normal time display mode.
4.2 Radio synchronised Clock
If the quality of reception is good, the time on the clock will be set automatically. In zones where
the radio signal is difficult to receive, clock can be set on time manually, following the procedure
described in the previous chapter.
1
Maintaining pressure on the [+] button for longer enables you to
increase the values rapidly (minutes, hours, days, etc).
SELECT
