6
4) Clip the electronic card onto the connector, then fix it in place using the two Torx T8 screws:
5) Attach the aluminium plate in order to close up the space around the option card:
NOTE: repeat these 5 steps for each option card you wish to install.
6) Connect the SATA cable linking the Network card to the Netsilon motherboard:
this operation is only valid for the Network option card (RJ45) and the Network Fiber option card (2
SFP). For other option cards, see point 7).
7) Close up the Netsilon device by refitting the black cover identically to its original condition.
8) Connect the power supply and turn the switch to ON (I).
9) Connect the network cable to the ETH0 port to access the web server.
