!
Removing/Installing a Lens, Lens Cone, or Filter
9
Removing a Lens
Reverse the
installation
procedure.
Once the lens is in
the unlocked
position, use your
index finger on the
opposite side of
the lens opening
to help push the
lens cartridge out.
Installing a Lens
Place the lens into
the lens opening so
that the lens
hashmarks look like
an 'X'. Use your
thumb to twist the
lens clockwise until
the lens hashmarks
look like a '+' and
you feel the lens
lock (click) into
place.
Removing/Installing a Lens
Removing/Installing the Lens Cone
The lens cone is keyed to be installed only one way. To
remove the lens cone, pinch the inside and outside edge
of the cone with forefinger and thumb and pull straight
off the PMM body.
To install the lens cone, line up the notch on the lens
cone with the triangle on the PMM body. Press the lens
cone onto the PMM body until the lens cone is completely
seated.
Removing/Installing a Filter
Removing a Filter
Reverse the
installation procedure.
When the nubs are in
the north/south
position, the filter
carrier should easily
lift out.
Installing an
optional Filter
The filter carrier has
two locating nubs.
Press the carrier in
place with the nubs
positioned north/
south. With your
fingertips on the nubs,
rotate the carrier
clockwise 30 degrees
until you feel a slight
click.
Hashmarks
look like a
X
Hashmarks
look like a
+
Locating
nubs are
positioned
north/south
Rotate nubs
clockwise
30 degrees
Lens
cartridge
removed
Filter
Carrier
removed
