Bodart&Gonay ARGOS 47GV74E, Instructions For Use And Maintenance Manual, Page: 15 / 32

Argos
15
9 USING THE REMOTE CONTROL
- LIGHTING THE PILOT LIGHT: “Argos Me1.1” diagram
To light the pilot light, the remote control must be in OFF mode. Press the right (POWER) butt on once,
ON mode fl ashes, then validate the operation by pressing the left (SET) butt on, and ON mode remains
on the display.
Sparking continues for 10 seconds after the lighting procedure has started.
Before changing the fl ame level, wait 15 seconds for the pilot light to stabilize.
- LIGHTING THE BURNER: “Argos Me1.1” diagram
When the pilot light has stabilized, press the (HIGH/HAUT) butt on to increase the gas fl ow and the (LOW/BAS)
butt on to reduce fl ow.
There are 3 gas levels.
- CHANGING TO THERMOSTAT MODE: “Argos Me2.2 en 2.3” diagram
T
o change to “thermostat” mode, press twice on the left (SET) butt on, and then choose the temperature requi-
red using the plus and minus butt ons.
Temperature information for adjusting the appliance is gathered every 6 minutes.
- CHANGING TO MANUAL MODE: “Argos Me 2.4” diagram
To change to “manual” mode, press twice on the left (SET) butt on, then choose the level required using
the plus and minus butt ons.
- CHANGING THE UNIT OF TEMPERATURE: “Argos IT.2” diagram
To change from Fahrenheit to Celsius, fi rst put the appliance in OFF mode, and then press POWER. Wait for ON
to fl ash then press POWER and HIGH simultaneously.
- VENTILATION MANAGEMENT:
Ventilation starts after around 15 minutes of the fi replace being in operation, when the latt er
has reached a certain temperature.
As soon as the fan starts you can adjust its output with the aid of the variator.
The appliance is designed to cut out after 24 hours in operation.
Simply restart the appliance to put it back into operation.