13
8.1.4 Ticket Width Adjustment
To adjust the paper path for use with a different ticket width, loosen the two thumbscrews located on
the adjustable slide block. Slide the block to the fully open position. Insert your ticket stock into the
paper guide. Slide the block to the proper ticket width setting and tighten the two thumbscrews.
On reverse adjustable printers (RADJ), the “special head” setting on the control panel must be used
to load the new ticket width into the printer’s memory. No control panel adjustment is necessary on
standard adjustable printers (ADJ). If the printer lacks a control panel, the width adjustment can be
made through software. (see the
programming guide
for both control panel and software
adjustments.)
Note: The ticket should move freely in the paper guide, do not pinch the ticket between the
adjustable slide block and the opposite paper guide wall.
THUMB SCREWS
ADJUSTABLE SLIDE BLOCK
Click here to return to >
Table of Contents
