Boca EXPRESS 14.4, User Manual, Page: 12 / 52

On-Line EXPRESS
12
2. If you are using a telephone, check for a dial tone
using the telephone handset. If a dial tone is heard,
continue with the next step. If you do not hear a dial
tone, check the connections you made on pages 8-10,
or refer to Troubleshooting (Section Three).
3. Your communications software should already be
loaded as instructed on page 10. If not, start it now
and enter terminal mode.
IMPORTANT: If you are not in terminal mode and you type
AT commands at the DOS prompt, a “Bad Command or File
Name” message will result.
4. Type in the command ATZ followed by ENTER and
the modem will respond with OK. If the modem does
not respond with OK, refer to the Troubleshooting
section of this manual.
5. Start your communications software and enter
terminal mode; AT commands typed in at the DOS
prompt will result in a “Bad command or file name”
message. Type
ATH1 followed by ENTER and you
should hear a dial tone from the speaker on the
modem.
6. Type ATH followed by ENTER to put the modem on
hook. This confirms that the modem has been
successfully installed into the computer.
7. Your modem is now ready for use. Continue now
with your communications software and
documentation.