54M Wireless LAN CardBus Card User’s Manual
2. Select the “
Configuration”
tab. The
profile
setting allows you to save
configurations in different profiles for different working environments. The default
profile will contain the initial configuration setting when you install the Card. Under
the
Operating Mode
drop-box, you may choose either Infrastructure or Ad-Hoc.
The Infrastructure mode allows a wireless adapter to communicate with a wired
network employing an Access Point, while the Ad-Hoc mode allows
wireless-to-wireless, peer-to-peer communication. If you choose Infrastructure, the
SSID
should have the same name as the Access Point. If you choose
Ad-Hoc
, all
clients should share the same
SSID
name. You may also select which
Transfer
Rate
you wish to use:
54Mbps/ 48Mbps/ 36Mbps/ 24Mbps/ 12Mbps/ 11Mbps
/9Mbps/ 6Mbps/ 5.5Mbps/ 2Mbps/ 1Mbps
or
Auto Rate
. Under
Power Saving
Mode
, you can select
Enabled
to allow your adapter to go to sleep mode while the
adapter doesn’t precede the data transmission. Or select
Disabled
to make the
adapter never go to sleep mode. Click
Apply
to save the settings.
31
