Boca Systems M144Ai, Manual

Page: 10 / 40

10
On-Line EXPRESS
7. Secure the modem into place by aligning its metal
retaining bracket with the hole in the top edge of the
system’s rear panel. Fasten the metal bracket with the
screw removed in step 5.
8. Replace the system cover, reconnect any detached devices
and power cords, and power up your computer.
Windows 3.x Users
(If you are a Windows 95 user, continue with Connecting the
Phone Line below)
Run COMCHECK again and this time select “I have
installed the M144AI and wish to continue”. COMCHECK
then starts Microsoft Windows and launches the setup
program for you. Follow all on-screen instructions.
NOTE: If you do not have Microsoft Windows installed on
your computer, COMCHECK starts the installation program
for DOS. If you need to install drivers manually, go to Appendix
D. If you need to change configuration settings for DOS, go to
Appendix E.
Connecting the Phone Line
1. If you are in Windows, exit and turn off your computer.
2. Plug either end of the supplied RJ-11 telephone cable into
the LINE jack on the modem. The LINE jack is the
topmost jack on the modem.