26
Boca’s Family of Ethernet Products
Installing the NDIS Boot ROM
1. Obtain a boot ROM.
2. Put the Boot ROM in the 28-pin socket. Make sure you line
up the notch on the Boot ROM with the notch on the socket.
3. To enable the Boot ROM, run the BENCFG utility. Select
Mode Settings, then Boot ROM Enable.
4. The Boot ROM will work only with the following four
configurations:
I/O
INTERRUPT
BOOT ROM
ADDRESS
CONFIG.1
300h
3
C800h
CONFIG.2
320h
5
CC00h
CONFIG.3
340h
4
D000h
5. Follow the LAN Manager server setup procedure for starting
remote booting services on the LAN Manager server. Refer
to the LAN Manager documentation.
6. Remove any boot drives from the workstation (A:, C:) and
boot from the server.
U2
12345678
12345678
12345678
12345678
123456789
123456789
