
48
BOCALANcard-PCI
Adapter # = 0
MPX
= C7
The MPX switch specifies the DOS multiplex (MPX)
number to use for communication with
AILANBIO.EXE. You will need to change this number
ONLY if the default MPX number is in use by another
application or NETBIOS. Multiplex numbers 00h
through BFh are reserved for DOS use; therefore, you
must use a multiplex number between C0h and FFh.
2. Using command line switches, you can assign different
values for the Boca Ethernet adapter driver. Example:
BOCALC.EXE/MPX=D7/
AILANBIO.EXE/MPX=D7/ADAPTER=1
The command line switches instruct the NETBIOS to
load the BOCALANcard-PCI as Adapter number 1
DOS MPX number D7.
3. If the driver is installed successfully, the BOCALC.EXE
driver will produce the message:
---- BOCALC DRIVER INSTALLED ----
4. Other switch commands that are available: