background image

 

 

General instructions 

 

 

 

CAUTION 

 

 

 

Read the operating instructions! 
The operating instructions provide an introduction to the safe use of the products. 
•  Read the operating instructions for all system components! 
•  Observe accident prevention regulations! 
•  Observe all local regulations! 
•  Confirm with a signature where appropriate. 

 

 

 

 

 

  NOTE 

 

 

  In the event of queries on installation, commissioning, operation or special conditions at the 

installation site, or on usage, please contact your sales partner or our customer service 
department on +61 (02) 8874 4721. 
A list of authorised sales partners can be found at www.boc.com.au or www.boc.co.nz 

 

 

 

Liability relating to the operation of this equipment is restricted solely to the function of the equipment. No other 
form of liability, regardless of type, shall be accepted. This exclusion of liability shall be deemed accepted by the 
user on commissioning the equipment. 
 
The manufacturer is unable to monitor whether or not these instructions or the conditions and methods are 
observed during installation, operation, usage and maintenance of the equipment. 

An incorrectly performed installation can result in material damage and injure persons as a result. For this reason, 
we do not accept any responsibility or liability for losses, damages or costs arising from incorrect installation, 
improper operation or incorrect usage and maintenance or any actions connected to this in any way. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

© 2009  
The copyright to this document remains the property of the manufacturer. 

Reprinting, including extracts, only permitted with written approval. 

Subject to technical amendments. 

 

Summary of Contents for Smootharc Elite MMA 162 VRD































Reviews: