BOC Edwards CV-6SL, Instruction Manual

Page: 27 / 84

27
The switching between the operational modes is performed automatically on the Gun Supply Circuit
Card. The high voltage power supply initiates the switching when the high voltage is turned on and
operating in its regulation window.
Position Power (Optional)
The position supply uses the rail voltage provided on the input to the Gun Supply Card. The position
supply is low power, 15 volts at 45 watts. The supply uses a solid-state inverter circuit switching at
100k Hz frequency. The supply is current regulated with feedback from a low end shunt. The
position supply has a positive DC output. The negative low end is grounded.
The filament supply PCB must be ordered with a position supply.
#6024 - 6105-0 "Optional"
Filament Supply PCB CV-XS (with position supply)
#6024 - 6106-0 "Standard"
Filament Supply PCB CV-XS (without position supply)