Sterilizing UV Lamp
Product Specification
ENVIRONMENT-FRIENDL
DESIGNED BY BOBOT ROBOTICS INC.(USA)
Y DIPOSAL
11
12
You can help protect the environment!
Please remember to respect the local regulations:
Hand in the non-working electrical equipments to an appropriate waste
disposal centre.
10.Product Specification
Model No: MOP OPT
Rated Voltage: DC 14.4V
Rated Power: 85W
Noise Level: about 60dB
Battery Capacity: 2600mAh
Net Weight: 4.4kg
Giftbox Size: 510*376*155mm
Charging Time: 4-5h
Working Time: >45min(Dry)
> 25min(Wet)
Water Tank: 240ml
Product Size: 405*220*1200mm
Net Weight: 3.2kg
Package Size: 530* 393*173mm
For continuous product improvement, we reseve the right to any technical and
design change
Parts Introduction
The role of the UV lamp is mainly used for indoor sterilization and disinfection in the
home, killing ground bacteria and viruses while mopping the floor.One machine for
multiple uses.
Effect
Instructions
After starting the machine, you can see the two LEDs on the left and right of the UV
module are on, you can use it, enjoy the clean floor and sterilize at the same time
Convenience.
UV lamp module
Indicator light
Precautions
1, it is strictly forbidden to directly touch the UV lamp tube with hands, so as not to
cause scratches or damage, thereby affecting the service life of the UV lamp tube.
2, the use of UV lamps in flammable and explosive materials is prohibited to prevent
explosion.
3, do not look directly at the lit UV with naked eyes, so as not to irritate the eyes or
cause vision loss.
4. Do not touch the UV lamp that is lit or just turned off with your hands, otherwise
the surface temperature will be too high and burns.
5. When using, please pay attention not to let the UV lamp shine on the skin, so as
not to damage the skin by ultraviolet radiation.
Twenty-six, try not to switch on and off the UV lamp frequently, because the lamp
tube will be lost and the service life of the UV lamp will be reduced every time you
switch on and off.
7. When installing or replacing the UV lamp tube or cleaning the lamp cover, the
power must be turned off to avoid electric shock.
