RAISE SEAT BACK
REMOVE ACCESSORY BAR
Using a Phillips screwdriver,
remove both screws.
Move car seat handle into
upright carrying position.
POSITION HANDLE
TO REMOVE Peg Pérego®
Go To
Graco®
POSITION CAR SEAT
Place car seat “rear facing”
onto ICSA
main bar,
in a
straight downward motion.
Be sure restraint
belt tension is not
constricting child as it
may cause serious injury.
Warning
Pull on red ring to tighten.
TIGHTEN RESTRAINT BELT
DOUBLE CHECK CAR SEAT IS
SECURELY ATTACHED
Pull car seat upward without
removing restraint belt.
You should not be able to remove
car seat without unfastening
restraint belt.
Warning
Failure to securely attach car seat
may result in serious injury or death.
TIP
: Attach screws to
accessory bar
for future use.
CAUTION
: Ends of
accessory bar
are sharp!
See the “Reclining Seat”
section of your stroller
owner’s manual.
OMA18B
P8