BOB-HOME KECS 8003 TC, Manual

Page: 19 / 22

according to your demand, then press the “Temperature setting buttons” to set the brewing
temperature, and the LCD display will indicate the set brewing temperature. After finish
setting, you can press the “Custom” button to select your desired tea strength, and there are 4
strengths including “Strong”, “Medium”, “Mild” and “Custom” for selection. When setting the
strength of tea, the LCD display will indicate the set brewing time. After selecting the type of tea and
the brewing time, hold and press the “AUTO START” button for 3 seconds, its corresponding
indicator illuminates in blue, and the LCD display indicates the “Current time” and “Auto-start time”,
press the “Temperature setting buttons” to set the current time, and press the “Time setting buttons”
to set the auto-start time. The time cycle is 12 hours. Then press the “ON/OFF” button to enter into
the auto-start working mode, at that time, the indicator of the “ON/OFF” button illuminates in blue,
the LCD display lights solidly, and the current time starts to count up until it reaches the auto-start
time, then the tea-brewing function is activated and the appliance will enter into standby mode after
finish brewing.
5. KEEP WARM
Press “Keep Warm” button, the appliance enters into the keep-warm mode after finish brewing, at
that time, its corresponding indicator illuminates in blue, the keep-warm temperature is
≥ 60
℃
, and the
keep-warm time is 30 minutes.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry protection will automatically
switch off the power. If this occurs, allow the kettle to cool before filling with cold water before re-
boiling.
C L E A N I N G A N D M A I N T E N A N C E
Always disconnect the appliance from the power outlet and make it cool down completely before
cleaning. Never immerse the kettle or power base into the water or other liquid to avoid electric
shock.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with
these parts.
2. Wipe the appearance of water kettle and base with a mild and damp cloth or cleaner, never use
a corrosive cleaner.
CAUTION : Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the
kettle.
1. Do not immerse the kettle lid into the water and wipe it with a wet cloth.
2. The power cord can be stored at the power base when the kettle is not used.
GB