BNC 845-M Programmer'S Manual Download Page 48 | Manualshive

Page: 48 / 52

background image

48

Model 845-M Programmer’s Manual V1.1 2011

[:SYSTem:COMMunicate] Subsystem

Command

Parameters

Unit

(default)

:SYSTem:COMMunicate:LAN:CONFig

DHCP|MANual|AUTO

DHCP

:SYSTem:COMMunicate:LAN:DEFaults

V0.4.1

:SYSTem:COMMunicate:LAN:DHCP:TIMeout

N/A 30 sec

:SYSTem:COMMunicate:LAN:GATeway

<ipstring>

“0.0.0.0”

:SYSTem:COMMunicate:LAN:IP

<ipstring>

:SYSTem:COMMunicate:LAN:RESTart

:SYSTem:COMMunicate:LAN:SUBNet

<ipstring>

“255.255.255

.0”

:SYSTem:COMMunicate:SOCKet:ECHO

ON|OFF|1|0

OFF

:LAN:CONFig

:SYSTem:COMMunicate:LAN:CONFig DHCP|MANual|AUTO

:SYSTem:COMMunicate:LAN:CONFig?

This command sets the signal generator’s internet protocol (IP) address.
MANual The user assigns an IP address to the signal generator.

DHCP The network assigns an IP address to the signal generator. If DHCP fails,
manual configuration will be used.

AUTO    The network  assigns an IP address  to the signal generator with a
fallback to Auto- IP if DHCP fails. If  both  DHCP and Auto- IP fail, manual
configuration will  be used.

:LAN:DEFaults

:SYSTem:COMMunicate:LAN:DEFaults

This command restores the instrument’s LAN settings to their factory default values.

:LAN:DESCription (not implemented)

:SYSTem:COMMunicate:LAN:DESCription <string>

:SYSTem:COMMunicate:LAN:DESCription?

This command defines the instrument’s web description. The query returns the current saved
setting.

:LAN:DHCP:TIMeout (not implemented)

:SYSTem:COMMunicate:LAN:DHCP:TIMeout {30}|60|90|120sec

:SYSTem:COMMunicate:LAN:DHCP:TIMeout?

This command enables the user to change the maximum length of time that the instrument will spend
trying to acquire an IP address using DHCP. If the LAN Config Type is set to Auto, then

the Auto- IP protocol will be used as a fall- back when time- out does occur. The DHCP timeout value is
stored in the same non- volatile ram as the other LAN configurations. The query returns the current
setting, not the saved setting.

Default 30 Seconds

:LAN:DOMain (not implemented)

:SYSTem:COMMunicate:LAN:DOMain <string>

:SYSTem:COMMunicate:LAN:DOMain?

«
...
46
47
48
49
50
...
»

Summary of Contents for 845-M





















































Reviews:

No comments

Related manuals for 845-M

Brand: Goodmans Pages: 2

Brand: Keysight Technologies Pages: 36

Brand: Hantek Pages: 37

Brand: Curtis Pages: 22

Brand: AudioSource Pages: 8

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 20

Brand: Philips Pages: 21

Brand: Philips Pages: 24

Brand: Sangean Pages: 12

Brand: Hyundai Pages: 32

Brand: Medion Pages: 80

Brand: BUNDU POWER Pages: 29

Brand: Rohde & Schwarz Pages: 516

Brand: NGS Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands