Page | 4
Safety
This machine is a high-performance battery operated tool.
Failure to follow the warnings and instructions may result in
an electric shock, fire or serious injuries.
• Always operate the tool with personal
protection equipment (safety helmet and
eye protection, etc...). Using the appropri-
ate safety equipment at all times will avoid
body injury.
• Keep children and bystandards away
while operating this tool. Distractions may
cause serious accidents.
• Do not aim the tool at
those standing around your work area. Se-
rious accidents can happen if you mishan-
dle this tool.
• Do not place your hand
or position the machine mouth (between
arm A and the curl guide) near the body.
This will cause serious injury.
• Do not attempt to dismantle, modify or
perform any major maintenance on this
tool. Any modification may result in a de-
teriorations of the tool’s performance and
may cause serious injury and void any war-
ranty.
• Make sure that the electric switch is in
the off position when the tool is not being
used or when abnormalities occur. When
changing or adjusting the wire coil, or
when changing the battery pack, make sure
to turn off the main power switch and lock
the trigger.
• Do not place fingers or hands in the wire
coil area. This may result in distortion of
the coil and may cause injury to you.
• Do not operate this tool
in the rain or areas where
moisture is present. This may result in
electrical shock or accident.
• Stay particularly alert while working in
a loft area. Do not operate any power tool
under the influence of drugs, alcohol, or
medication. A moment of inattention may
result in serious injury to you or someone
near you.
• Do not operate this tool in a hazardous
area containing flammable liquid, gas or
powders which may ignite and cause a fire.
• The charger has been de
-
signed to use standard AC
power (100-240V ~ 50-60Hz). Do no re
-
charge the battery using a generator power
supply as this will cause the charger to mal-
function.
• Our batteries charge best when the ambi
-
ent temperature is between 32°F and 113°F.
Super-cooling or over-heating environ-
ments are not suitable for charging.
• Continuous use of the
charger is not advised as this will shorten
the life span of the battery and the perfor-
mance of the charger itself. When not in the
charging mode the power supply must be
turned off.
• Please do not carry the charger by the
cord. Do not pull out the power cord from
the wall socket with a strong force, this will
damage the cord and break the wires or
cause a short circuit. A damaged cord must
be repaired or replaced immediately.
• Use only the specified charger that came
with your machine. Using a unauthorized
charger may result in damage to the battery
components and possible explosion.
• Avoid battery terminal
contact with other metal objects. Trying to
recharge the battery with an external wire
could result in a short circuit of the battery.
• Do not throw away the
protective battery cap. Use it to cover the
terminal when not in use.
