BN BNR1841, Owner'S Manual

Page: 12 / 14

11
Adjusting suction power
⑦
Adjust the suction power according to the intended operation
-Turn the vacuum speed dial (H) clockwise to increase the suction power.
-Turn the vacuum speed dial (H) anticlockwise to decrease the suction power
Guard segment
⑧
The detachable guard segment allows to reduce the distance between the wall /
ceiling and the side of the sanding paper / sanding pad. Remove the guard segment
when the work surface is close to the other objects (e. g. wall, ceiling).
Detachable guard segment and rotated by 360
°⑧
The detachable guard segment allows to reduce the distance between the wall /
ceiling and the side of the sanding paper / sanding pad. Remove the guard segment
when the work surface is close to the other objects (e. g. wall, ceiling).And sanding
pad can be rotated by 360
°
, applying for different edges.
WARNING! Use the product without guard segment only for sanding
operation on work surface close to other objects!
-Remove the guard segment(K1) from the guard (K).
-After operation, refit the segment (K1) onto the guard (K ). Ensure the three points
of segment (K1) press into the right position .
MAINTENANCE / SERVICE
Store the tool in its protective case in a dry and lockedup place, out of reach of
children
Always keep tool and cord clean (especially ventilation slots )
do not attempt to clean ventilation slots by inserting pointed objects
through openings
disconnect the plug before cleaning
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with
household waste material
(only for EU countries)
- in observance of European Directive on waste of electric and electronic
equipment and its implementation in accordance with national law, electric tools
that have reached the end of their life must be collected separately and returned to
an environmentally compatible recycling facility