IMPORTANT!
The thermostat power supply must be disconnected when inserting the
display part (the screen) into the base or removing it from the base!
Failure to follow this instruction may result in an irreparable damage to
the thermostat.
Before starting work the installer should carefully read this Installation & Operation
Manual, and make sure all instructions contained therein are understood and
observed.
- The thermostat should be installed by suitably qualified electrician.
- All instructions in this Installation & Operation manual should be observed when
working with the thermostat. Any other application shall not comply with the
regulations. The manufacturer shall not be liable in case of incompetent use of the
thermostat. Any modifications and amendments are not allowed for safety
reasons. The maintenance may be performed by service shops approved by the
manufacturer only.
- The functionality of the controller depends on the model and equipment.
This installation leaflet is part of the product and has to be obtained.
APPLICATION
- The thermostats are developed to control and manage all type of
heating installations.
- The controllers have been designed for use in residential rooms, office spaces
and industrial facilities.
Verify that the installation complies with existing regulations before operation to
ensure proper use of the installation.
SAFETY INSTRUCTIONS
Before starting work disconnect the power supply!
- All installation and wiring work related to the thermostat must be carried out
only
when de-energized. The appliance should be connected and
commissioned by qualified personnel only. Make sure to adhere to valid safety
regulations.
- The thermostats are neither splash- nor drip-proof. Therefore, they must
be mounted at a dry place.
- Do not interchange the connections of the sensors and the 230V connections
under any circumstances! Interchanging these connections may result in life
endangering electrical hazards or the destruction of the appliance and the
connected sensors and other appliances.
FIRST INSTALLATION
Batteries inside the thermostat must be charged for at least 6 hours to reach
maximum capacity to back up time.
1.
Product overview
Touch screen programmable thermostat specially designed to control different
types of heating systems.
The thermostat will allow you to optimize your energy consumption and increase
your comfort levels.
- Modern design with touch screen.
- Simplified wiring & Installation.
-
“Easy program creation” function.
- Fully programmable.
- Temporary override function.
- Anti freeze function.
- Holiday or Reception function.
- Connections for 2 sensors.
- Estimation of the cost and consumption of the installation
Options
Additional 2
nd
floor sensor with several possibilities
of regulation. (Floor,
combined…)
Or
Remote air sensor (T16R) for use in damp
conditions e.g. wet rooms or shower rooms
2. Menu structure
Mode
Manuel
Timer
OFF
Anti freeze
Vacation
Vacation settings
OFF
Anti freeze
Reduce
Sunday’s program
Set Return Date
Program
Program Menu
View Current Program
Select Program
Edit Program
User 1
User 2
User 3
Settings
Language
English
German
Czech
Spanish
French
Date and Time
Date
Time
DST
Display
Colour
-
Blue
-
Red
-
Green
-
None
Clean Screen
Screen Lock
Floor Temperature Display
-
Yes
-
No
Degree Format
-
°C
-
°F
Time Format
- 12h
- 24h
Installation
Sensor
Sensor Calibration
-
Int
-
Ext1
-
Ext2
Ext. Sensor Type
- Ext1 (10K
– 12K – 15K)
- Ext2 (10K
– 12K – 15K)
Regulation
Sensor Regulation
-
Air
-
Air + Floor
-
Floor
-
Air (Ext) + Floor
-
Air + Floor (x2)
Regulation Type
-
ON/OFF
-
PID
Floor Limit
-
Low
-
High
First Heating
-
Wood (10 days)
-
Concrete (21 days)
-
Ceiling (10 days)
Smart Start
o
Yes
o
No
Open window function
o
Yes
o
No
RESET (
press 2 seconds on the RESET button to reset your installation)
Statistics
View
View Last Day
View Months
View Year
kWh Price
Heating
Power
T16R
– Remote wall sensor