Thank you for purchasing a BN Thermic product. Manufactured to a high standard, this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance. Please ensure instructions
remain with your customer for their reference.
1 . S A F E T Y I N S T R U C T I O N S
1.1 ELECTRICAL SAFETY
WARNING!
It is the responsibility of the owner and the
operator to read, understand and comply with the
following:
You must check all electrical products, before use, to
ensure that they are safe. You must inspect power
cables, plugs, sockets and any other connectors for wear
or damage. You must ensure that the risk of electric
shock is minimised by the installation of appropriate
safety devices. A Residual Current Circuit Breaker
(RCCB) should be incorporated in the main distribution
board. If in any doubt consult a qualified electrician.
You must also read and understand the following
instructions concerning electrical safety.
▪
The Health & Safety at Work Act 1974 makes
owners of electrical appliances responsible for the
safe condition of those appliances and the safety of
the appliance operators. If in any doubt about
electrical safety, contact a qualified electrician.
▪
Installation should always be carried out by a
qualified electrician or a competent person in accordance with current electrical regulation.
▪
Ensure that the insulation of all the cables on the appliance is undamaged and safe, before connecting it to the
power supply.
▪
Ensure that the cables are always protected against short circuit and overload.
▪
Regularly inspect the power supply cables for wear or damage and check all connections to ensure that none are
loose.
▪
Important: Ensure that the voltage marked on the appliance matches the power supply to be used and that a
correctly rated fuse is fitted.
▪
DO NOT use worn or damaged cables or connectors. Immediately have any faulty item repaired or replaced by a
qualified electrician.
▪
The unit should be protected by a suitably rated isolator and fuse or MCB.
▪
This thermostat is suitable for indoor or outdoor use.
1.2 GENERAL SAFETY INSTRUCTIONS
✓
Remove all packaging and store it away from children.
✓
Familiarise yourself with the applications and limitations of the thermostat.
X
DO NOT
use in areas where hazardous gasses or dusts may be present.
X
DO NOT
disassemble the thermostat for any reason. This thermostat must be checked by qualified personnel
only.
X
DO NOT
use this thermostat to perform a task for which it has not been designed.
INSTRUCTIONS FOR:-
TAMPER-RESISTANT THERMOSTAT
Model:- PROSTAT3
REGISTER
: PLEASE REGISTER THIS PRODUCT ONLINE TO ACTIVATE
YOUR GUARANTEE AT www.bnthermic.co.uk
IMPORTANT
: PLEASE READ THESE INSTRUCTIONS, NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS, AND CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE
FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY.
