4. SETTING THE OPERATION MODE (5/2 DAY, 7 DAY OR 24 HOUR).
1. Switch the slider to
PROG
.
2. Press
+/
–
buttons to move between 7 day, 5/2 day or 24hr operation.
5/2 Day operation
is shown by MO, TU, WE, TH, FR flashing (5 Day) and then SA, SU flashing (2 Day).
7 Day operation
is shown by just one day flashing at a time.
24 hr operation
is shown by MO, TU, WE, TH, FR, SA, SU flashing at the same time.
3.
Wait 15 seconds to automatically confirm and return to Run mode or press
Next
to move to ‘Setting the
Programme’.
5. SETTING THE PROGRAMME.
1. Choose between 5/2 day, 7 day or 24 hr operation (see above steps 1-2).
2. Press the
Next
button. The time will flash and P1 will be displayed (the 1st temperature event).
3. Press
+/
–
to set the time (10 minutes increments). Press the
Next
button and the temperature will flash.
4. Press
+/
–
to set the temperature (increments of 0.5°c). Press the
Next
button to go to the next time temperature
event (e.g. P2).
5. Repeat steps 3 - 4 for all temperature events.
6. Press
A
to accept / confirm temperature events and move to the next day / block of days.
7. Repeat steps 3 - 6 until all days have been set. Then wait 15 seconds to automatically confirm and return to run
mode or press the
Home
button.
6. ALL DAY SETTING.
1. Switch the slider to
AUTO
.
2. Press the
A
button under the fascia. The display will now show
AL
(All Day).
3. Press the
+
/
–
button to set the temperature (increments of 0.5°c).
4. The mode will quit by 00.00 that day. Press the
Home
button to cancel and return to Auto Mode.
7. PERMANENT MANUAL OVERRIDES.
1. Switch the slider to
MAN
. MAN will appear in the display.
2. Press
+/
–
to adjust the temperature to the desired setting. This will set a constant temperature 24hrs a day.
3. Switch the slider to
AUTO
to revert back to Auto mode.
8. TEMPORARY MANUAL OVERRIDES.
1. To temporarily override the Programmable Room Thermostat status or temperature press the
+/
–
buttons. The Programme
Events Display (e.g. P1) will no longer be shown.
2. Press the
+
button to increase the set temperature in increments of 0.5°c and / or press the
–
button to decrease the set
temperature in increments of 0.5°c.
3. Once the desired temperature is reached (and after approx. 6 seconds) the time display will be replaced by a display indicating
the time left to the next programme (the length of time the temporary override will run, if left unhindered) and the display then
alternates between the time left and the current time. When the next ON / comfort programme is arrived at, the temporary
override will end and Auto mode is reactivated.
4. Press the
Home
button to cancel this function and reactivate Run mode.
9. HOLIDAY MODE.
Holiday Mode saves energy by letting you reduce the temperature for 1 to 99 days while you are away from home,
resuming normal operation on your return.
To set the Holiday Mode:
1. Make sure the Programmable Room Thermostat is in Auto mode. Press the
H
button, underneath the fascia and
the suitcase symbol will appear on the display and the number of days will flash.
2. Press
+/
–
to set the number of days you will be away.
3. Press the
Next
button and the temperature will flash. Press
+/
–
to set the desired temperature.
4. Press the
Next
or
Home
button or wait 15 seconds to automatically confirm.
5. The number of days chosen will alternate with time symbol on display and the number of days will count down.
6. Once the countdown has finished the thermostat will return to normal operation. It may be advisable to set the
Holiday Mode 1 day less so the house is back up to temperature for your return.
7. To cancel the Holiday Mode setting or to exit the function at any time, press the
Home
button to revert back to
Run mode.
10. FROST PROTECTION.
This function is provided as an option if it is desirable to turn the heating off permanently. It is usually used in summer.
To set the Frost Protection Mode:
1.
Switch the slider to
OFF
to enter the Frost Protection Mode. The display will show the frost protection snowflake
symbol and the set temperature will be 5°C.
2.
Switch the slider to
AUTO
to exit Frost Protection Mode and revert to
AUTO
mode.
4
