Page | 7
3/4”Deep Grove Trim Plate: This part was specifically
designed for the easy addition and removal from the
Bridge Support that is attached to the Tool. Because of
its design, the 3/4” Deep Grove Trim Plate can be re-
moved without having to remove the Blade first. What
this does is allow for easier removal in case of clean-
ing the tool, and yet allow the tool owner to get easy
access to wiping the Blade after each use. This again
allows further cleaning of the bridge and the Locking
Pin and Clip, thus providing a further cleaning. The trim
Plate was Powder Coated for additional protection of
the aluminum plate. Even though Powder Coating pro-
tects the outer finish of the aluminum, normal wear
and tear from the Abrasive Concrete wears the finish off
these surfaces rather quickly depending on use. This is
normal. The tool will perform way beyond the time the
finish wears off, and after you notice some normal wear
marks on the Trim Plate itself.
WRITTEN ONE YEAR LIMITED
WARRANTY FOR TOOL
Every Robo Joiner™ Tool is thoroughly inspected before
leaving the factory and again during packaging proce-
dures. The manufacturer warrants each tool unit to be
free from defects of workmanship and materials for a
period of one year from date of original purchase. War-
ranty does not apply to Cordless Tool being dropped
onto hard surfaces, driven over, or any other mistreated
uses. Should any trouble develop during this one year
of period, return the defective unit freight prepaid, or by
hand to the store from which it was purchased, along
with receipt. If inspection shows the trouble to be the
result of defective workmanship or material, the man-
ufacturer will replace the defective unit at our option
without charge.
THIS WARRANTY DOES NOT APPLY WHERE:
Repairs have been made or attempted by others with-
out manufactuers approval; Replacement is required
because of improper use; The unit has been abused or
improperly maintained, and/or Aterations have been
made to the unit (Robo Joiner™).
WRITTEN SIX MONTH LIMITED
WARRANTY FOR CHARGER
Every Robo CHARGER UNIT (includes Battery) is thor-
oughly inspected before leaving the factory and again
during packaging procedures. The manufacturer war-
rants each Charger unit including Battery(s) to be free
from defects of workmanship and materials for a pe-
riod of six months (180 days) from date of original pur-
chase. Warranty does not apply to battery and/or char-
ger being dropped onto hard surfaces, driven over, or
any other mistreated uses. Should any trouble develop
during this six month period, return the defective unit
freight prepaid, or by hand to the store from which it
was purchased, along with receipt. If inspection shows
the trouble to be the result of defective workmanship
or material, the manufacturer will replace the defective
unit at our option without charge.
THIS WARRANTY DOES NOT APPLY WHERE:
Repairs have been made or have been attempted by
others without manufactures approval; Replacement is
required because of improper use; The unit has been
abused or improperly maintained, and/or Alterations
made.
Robo Joiner™, Trademarked, Patented and other Patent
Pendings.
Please do not duplicate any of the written materials and
images by any means without written permission from
BN Products-USA, LLC. All rights reserved.
