Page | 11
N OTE:
The battery charger is for charging a BN Products-USA-battery
cartridge. Never use it for other purposes or for other manufacturer’s
batteries. If charging light flashes red/green, battery condition is as
below and charging m ay not start.
•
Hot battery cartridge from just-operated tool or battery cartridge that has been left in
a location exposed to direct sunlight for a long tim e.
•
Battery cartridge that has been left for a long tim e in a location exposed to cold air.
•
When the battery cartridge is too hot, charging will begin after the cooling fan in-
stalled in the charger cools the battery cartridge. Charging will begin after the battery
cartridge tem perature reaches the degree at which charging is possible. When the
temperature on battery is more than approx. 70°C, two charging lights may flash in
red color, and when approx. 50 °C – 70 °C, one charging light in red color.
If the charging light flashes alternately in green and red color, charging is not possible. The
term inals on the charger or battery cartridge are dirty or the battery cartridge is worn out
or dam aged.
Ch a rge r Ligh t
•
Blinking Green Light waiting to charge.
•
Solid Red Light as the battery charges
•
Solid Green Light the battery is fully charged.
•
Red Green Light dam age or overheat signal
Ch a rge r tro u ble s h o o tin g
1. If the LED lam p does not work.
•
Check connection of power cord into the outlet.
•
Check the cleanliness of power cord and battery term inal.
•
Insert another battery to check the charger working norm ally.
2. The green LED flickering when the battery is applied.
•
Low tem perature: Let stand at room tem perature until norm al tem perature occures.
If Checking does not solve the problem , please contact BN Products-USA, LLC or an au-
thorized service center nearest you.
Summary of Contents for BNCE-30-24V
Page 12: ...Page 12...
Page 13: ...Page 13...
